Shunts and busbars

Shunts and busbars

Besides electrodes and holders there are flexible shunts and busbars, which are wearing too and should be replaced in time. Flexible shunts can be standard or bespoke. There are varying leaf thicknesses from 0.05mm to 0.25mm and we can manufacture shunts up to a meter in length.

The technology of producing this part of welding machine is more complex than it may at first seem. If you choose the right material and produce according to the drawing it will radically change the life of flexible shunt. Shunts should be designed to the correct operating radius. If you purchase the shunt with incorrect operating radius it will reduce the lifetime.

If the wear of flexible shunts or busbars is about 10%, they should be replaced.

We can manufacture any sort of flexible shunts, busbars of any resistance welding. We usually use two methods (Riveting and Welding) for producing flexible copper shunts.

In order to get a commercial offer we are kindly asking you to send us the drawing.

If you have any questions regarding the choosing the right alloy please don't hesitate to contact us by email or phone.

Download AERIS 1130 Specification


Spot welding (straight electrodes bent electrodes cap electrodes)

Seam welding (discs and rings)

Butt welding

Projection welding

And other types of electrodes, including your drawings

You may also be interested in the following materials:

метки: busbars, shunts
Your contact:
Tel.: +7 499 5040446 ext.104
Skype: denis.tavluy

Send an inquiry

We will contact you within 3 hours